| Tie
up your watercraft with a Sandspike!
Sandspike is very Simple to use!
This innovative anchoring system
works great when you want to keep your watercraft secured but
don't have anything to tie to. The
Sandspike can keep your watercraft on the beach or off the beach
depending on which you prefer.
To keep it on
the beach
Simply find your spot on the beach
and insert the Sandspike into the ground with it angled away from
your watercraft. Then tie or clip your watercraft to it and that's
it!
Have a big
boat and worried it won't hold?
One spike will usually do the trick but if you feel
you need more holding power then double Spike it! The
double harness is available in all eight colors and are located with
the beach anchor lines.
Already have the beach
anchor line? Then just add the harness.
Don't have a clip on your
rope?
No problem just make sure
you have a loop tied at the end of the rope and insert it in the
hole on top from the bottom and wrap it around the top!
 
To keep your watercraft
off the beach
Anchor your watercraft
just offshore with your normal
anchor. (Anchor
Buddys work great) and then run a rope from the front of
your watercraft to a spot on the beach and insertthe Sandspike
into the ground with it angled away
from your watercraft tie or clip
to it and that's it! If you experience any resistance while inserting
the Sandspike, simply wiggle the Sandspike from side to side
while applying downward pressure and it will go in.
Why would I want
a Complete Kit?
Sometimes you find that the water is to
shallow for your watercraft and/or your rope is too short, no
problem just go out into the water a few feet and insert the Sandspike
into the beach. The float marks the location of
your Sandspike and if you should leave for a quick
run, the float will mark your spot on the beach
letting everyone know "This spot is already taken" The
custom mesh bag holds your Sandspike, rustproof
chain and float all in one nice package and there is even
plenty of room for your rope!
|