Applying your vinyl graphics is simple if you follow some basic guidelines. The registration numbers come in one piece and are sandwiched between a paper layer of transfer tape and a wax layer of backing.

Flatten it out in a warm room where pets and children can't find it. The transfer tape is a low tack sheet that will lift your graphic in one piece. The transfer tape is no match for the vinyl's pressure sensitive adhesive which will bond to the surface of the boat very tightly.

You will need the following items:

Mildly soapy water in a spray bottle or mister. Just enough dish detergent to break the surface tension and suds up a little---three or four drops per quart.
The squeegee enclosed in your package.
A roll of masking tape
An Exacto blade
A tape measure

Vinyl should never be applied in temperatures less than 40 degrees F� or
4 degrees C�. The lettering surface should be free of dirt and wax for best results.
Done properly, this job will last for over seven years.